Characteristics

• Protector Plus is a single component, solvent containing clear varnish , what practically brings to best qualities, if it is used as flat coat at the same time.
• It hardens within 8 to 10 hours if  applied in thinly layers after solvent evaporation and a temperature of approx. 20 -30° degree C .
• You reach a dustfree surface after 30 min. No additional heat necessarily.
• The drying process can last longer at lower temperatures.
• Protector plus is very resistant to pushes, impacts, scratches, chemicals and cleaner.
• The full capacity of Protector plus is given after 7 days

Danger notes:

• Inflammable.
• Breathing in and contact with the skin may occur unhealthily.
• Sensitization by skin contact possible.
• Irritates the breathing organs and the skin. Keep away for children.
• Handling only by specialist staff.

Safety advice:

• Musn't reach the hands of children.
• Don't breath in steam or aerosol. Using only in well aired areas .
• Use breathing apparatus in case of  insufficient ventilating.
• Avoiding touch with the eyes and the skin.
• In case of contact with the eyes thoroughly with water and consult a doctor .
• In case of skin contact, directly wash with soap and water..
• Immediately seeking a medical advice and show packing or label when swallowing product.

Clearcoat contains: Xylol

Download the safety data sheet (german version) from the clearcoat Protector Plus

Characteristics of the liquid product: